Griffin VTOL (2er Pack)

Das Griffin VTOL Golem Two Pack ist eine Miniatur aus Zinn und Resin, 1x kommt der Griffin in Walker-Pose mit Hex-Base und 1x in Flying-Pose mit Flight-Base daher.

Dieser Bausatz besteht aus Metall / Resin / Plastik, ist unbemalt und muss zusammengebaut werden.
 

Description

The Griffin VTOL Golem Two Pack is a pewter and resin miniature that includes 1 Griffin in Walker pose with hex base and 1 Griffin in Flying pose with flight base. Assembly and painting required, decals not included. The Griffin Golem is 1/144 scale and 45 mm tall in Walker pose to top of the twin linked LGLs.

PARTS/WEAPONS INCLUDED:

• 2 SETS OF GRIFFIN TORSO, HEAD, BUTT PLATE, 2X LOWER ARMS, 2X TWIN FEET CLAWS, 2X SINGLE HAND CLAW.
• 2 SETS OF GRIFFIN VTOL WINGS (3 RESIN PARTS) LEFT WING, RIGHT WING, AND TAIL.
• 1 SET OF WALKER LEGS (2 PARTS) AND HEX BASE.
• 1 SET OF WALKER POSE SHOULDER/UPPER ARMS
• 1 SET OF FLYING LEGS  (3 PARTS LEFT LEG, RIGHT LEG, AND HIP PART WITH BALL/SOCKET MOUNTING FOR MULTIPLE POSING OPTIONS) AND FLYING BASE.
• 1 SET OF FLYING POSE SHOULDER/UPPER ARMS
• 2 SETS OF TWIN MOUNTED LGL PARTS
• 2 SETS OF 2X GRIFFIN STYLE MAC (AA)  WEAPONS 1 USED IN STOCK SPATHA MODEL OR 2 USED IF THE UNIT IS MADE VETERAN FOR +2TV AND THE DUAL GUN VETERAN UPGRADE IS SELECTED FOR +1 TV.
• 2 SETS OF WIZARD VARIANT ELECTRONIC WARFARE/SATUP POD PARTS.
• 1 EDEN BANNER FLAG.

 

MODELLING NOTES:

THE MAJORITY OF THE GRIFFIN PARTS ARE MADE OF PEWTER, BUT ITS REAR MOUNTED VTOL WING IS MADE OF 3 RESIN PARTS TO KEEP ITS WEIGHT DOWN. WE SUGGEST THAT YOU ASSEMBLE AND PAINT THE MAIN BODY BEFORE MOUNTING THE REAR WING AND PAINT THE 3 RESIN WING PARTS BEFORE MOUNTING THEM. 

 

VTOL WING MOUNTING:

1. TAKE THE PAINTED LEFT AND RIGHT RESIN WING PARTS  AND PEG THEM INTO THE REAR OF THE GRIFFIN TORSO MOUNTING POINT, DO NOT GLUE THEM UNLESS YOU WANT THE WING IN A PERMANENT FIXED POSITION.

2. TEST THAT THE PEG FITTING IS NICE AND SNUG,  IF NOT ADD A SECOND LAYER OF PAINT TO THE PEGS, WAIT TO DRY AND TEST FOR A SNUG FITTING AGAIN. OR YOU COULD ADD A SMALL AMOUNT OF BLUE TAC PUTTY AROUND THE PEGS TO HELP WITH THE SNUG FITTING INSTEAD OF PAINTING THE PEGS. 

3. NOW GLUE THE 2 WINGS PARTS TOGETHER ALONG THE CENTER SEAM WHERE THEY MEET.

4. AFTER THE GLUE HAS SET THEN ALSO GLUE THE TAIL PART ONTO THE CENTER SEAM OF THE MOUNTED VTOL WINGS. 

NOW YOU SHOULD BEABLE TO RAISE AND LOWER THE VTOL WING AS DESIRED. 

Wichtiger Hinweis
Achtung! Nicht für Kinder unter 36 Monaten geeignet. Erstickungsgefahr wegen verschluckbarer Kleinteile.